Small Lightweight Hydraulic Cylinder
Shaft Diameter:32mm-125mm
Core Components:piston
Body Material:Steel
The range of pressure(MPa):0.3-0.7MAa(3-70kg/cm2)
Working fluid:Oil
Weight (KG):10
Standard or Nonstandard:Standard
The rang of temperature(℃):-10~+60(℃)
The of speed(mm/sec):8~300(mm/sec)
The service life of the cylinder can be increased by 2~3 times if only the influence of the cylinder cylinder is considered. The efficiency of the boring and rolling process is about 3 times higher than that of the grinding process. The above data show that the rolling process is efficient and can greatly improve the surface quality of the cylinder.
1. Double-acting cylinders are more versatile than their single-stage counterparts and can be used in a variety of applications.
2. They are often used in applications where fast and precise control of the rod stroke speed is required, such as in hydraulic jack systems.
3. Double-acting cylinders are preferred in applications where the rod speed needs to be precisely controlled, and where reciprocating motion is needed.
4. Double-acting cylinders have high strength and long service life due to their durable design.
5. They are available in a variety of sizes and ratings, with bore sizes ranging from 4mm to 500mm.
There are foreign bodies mixed in the cylinder：
Among the faults of the hydraulic cylinder, the most problematic is that it is not good to judge when the foreign body enters the hydraulic cylinder. After the foreign body enters, the outer side of the sliding surface of the piston is equipped with a seal with lip edge. Then, the lip edge of the seal can be scraped when working, which is beneficial to avoid scratch. However, the two ends of the piston with the O-shaped seal ring are sliding surfaces, and the foreign body is sandwiching between the sliding surfaces, which is easy to form scars.
All parameters can be customized
Parameters of the sample
Technical Parameter
|
Bore sizes of cylinder(mm) |
φ32 |
φ40 |
φ50 |
φ63 |
φ80 |
φ100 |
φ125 |
|
Fluid |
filtered oil |
||||||
|
Material of cylinder bareel |
carbon steel SKTM-13C/stainless rubes SUS 304/AL tubre A6063TDS-T5 |
||||||
|
The range of pressure(MPa) |
0.3-7.0MPa(3-70kg/cm2) |
||||||
|
The rang of temperature(℃) |
-10~+60（℃） |
||||||
|
The of speed(mm/sec) |
8~300（mm/sec） |
||||||
|
Length of standard piston |
30 |
30 |
30 |
30 |
35 |
50 |
50 |
|
Piston length when the stroke is between 1501-2500mm |
60 |
60 |
60 |
60 |
70 |
100 |
100 |
|
piston length when the stroke is between 2501~4000mm |
120 |
120 |
120 |
120 |
140 |
29 |
22 |
Features of customized hydraulic cylinder designed by the factory:
High-altitude operation machinery sends operators to the designated position in the air through the lifting platform for construction. Due to the high operation height, it has high requirements for safety, reliability, comfort and maneuverability. The cylinder product has realized modularization, serialization and lightweight.
Product highlights:
1. The application of standardized design, welding and anti-loosening patented technology makes the product more reliable;
2. Lightweight design minimizes the weight and makes the equipment safer and more efficient;
3. Simple design, convenient disassembly and maintenance;
The following are the common characteristics of the hydraulic equipment we produce:
1.Compact Design：Hydraulic Cylinders often employ a compact design by using rods and pistons that are much shorter than the stroke they achieve.
2.Precise Motion Control: By utilizing the power of hydraulics, hydraulic cylinders can precisely control their motion with accuracy.
3.Ease of Installation: Since hydraulic cylinders are relatively self-contained and come in fixed lengths, they are very easy to install and adjust.
4.Large Amounts of Force: Hydraulic cylinders can generate large amounts of force – up to 70,000 psi or 175 times the force of gravity.
5.Variable Speed Control: By regulating the flow of oil in the pressure path, the speed of the cylinder can be controlled with ease.
6.Greater Stroke Range: Hydraulic cylinders can generate greater stroke ranges than pneumatic cylinders due to their relatively low operating pressures.
After years of efforts and investment, we have become a leader in the hydraulic cylinder industry. Our partners are well-known hydraulic cylinder brands from the United States, Canada, Australia, Germany, the United Kingdom and other European countries. Product quality, shorter delivery time and customer satisfaction are our long-term commitments to global customers. I hope to be your partner.
1. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
2.What can you buy from us?
Hydraulic Cylinder, Air Cylinder, Supporting Cylinder Series, Booster Pump, Lever Cylinder Series.
3. Why should you buy from us not from other suppliers?
Our company has 20 years of research and development experience, focusing on the sales of oil cylinder and fixture, professional manufacturing, quality service, integrity and pragmatic, customer satisfaction is the core goal of the company.
4. What services can we provide?
Accepted Delivery Terms: null；
Accepted Payment Currency:USD;
Accepted Payment Type: T/T;
Language Spoken:English
Hot Tags: small lightweight hydraulic cylinder, China small lightweight hydraulic cylinder suppliers
You Might Also Like
Send Inquiry